Study on removal of silver and polyethylene terephthalate from exposed radiography films using enzyme protease

Journal of Material Cycles and Waste Management - In the proposed method, crude enzymes extracted from waste dry leaves of 15 different plants showing protease activity were used for removal of...     

Physical characterization,magnetic measurements,REE geochemistry and biomonitoring of dust load accumulated during a protracted winter fog period and their implications

The winter fog in India is a recurrent phenomenon for more than a decade now affecting the entire Himalayan and sub-Himalayan regions covering an area of nearly 500,000 km². Every winter (December–January), the air and surface transports in cities of northern India (Amritsar, New Delhi, Agra, Gwalior, Kanpur, Lucknow, and Allahabad) are severely disrupted with visibility reduced to <50 m at times. Since dust particles are known to act as nuclei for the fog formation, this study is aimed to carry out physicochemical characterization of the dust particulates accumulated during a protracted fog period from one of the severely fog affected cities of north India (Allahabad; 25°27′33.40″N–81°52′45.47″E). The dust-loaded tree leaves belonging to Ficus bengalensis and Ficus religiosa from 50 different locations between January 24 and 31, 2010 are sampled and characterized. The mass of dust, color, grain shape, size, phase constituents, and mineral magnetic parameters, such as magnetic susceptibility, SIRM, χ _fd%, and S-ratio, show minor variation and the regional influence outweighs local anthropogenic contributions. The dust compositions show fractionated rare earth element pattern with a pronounced negative Eu anomaly similar to upper continental crust and further suggesting their derivation from sources located in parts of north and central India.     

Particle size distribution of aerosols and associated heavy metals in kitchen environments

Mass size distributions of total suspended particulate matter (TSPM) was measured from Sep 2002 to April 2003 in indoor kitchen environments of five locations in Jawaharlal Nehru University (JNU), New Delhi, with the help of a high volume cascade impactor. Particulate matters were separated in five different size ranges, i.e. >10.9 microm, 10.9-5.4 microm, 5.4-1.6 microm, 1.6-0.7 microm and <0.7 microm. The particle size distribution at various sites appears to follow uni-modal trend corresponding to fine particles i.e. size range <0.7 microm. The contributions of fine particles are estimated to be approximately 50% of TSPM and PM10.9, while PM10.9 comprises 80% of TSPM. Good correlations were observed between various size fractions. Regression results reveal that TSPM can adequately act as a surrogate for PM10.9 and fine particles, while PM10.9 can also act as surrogate for fine particles. The concentrations of heavy metals are found to be dominantly associated with fine particles. However, the concentration of some metals and their size distribution, to some extent is also site specific (fuel type used).     

可持续能源技术:一项生物质气化案例研究

［1］Parikh,J.and S.Gokam(1993)Global Environment Change,Sepember,pp.276-91 ［2］Painuly,J.P,K.Bhattachrya and J.Parkh(1997)Proceedings of AIJconference ed.Kalipada Chaterjee,ISBN 81-7525-043-7,P.145.     

Solid waste management in Indian Himalayan tourists' treks: a case study in and around the Valley of Flowers and Hemkund Sahib

Solid waste generation in sensitive tourist areas of the Indian Himalayan region is approaching that of some metro cities of the country. The present study showed approximately 288 g waste generation visitor(-1) day(-1) compared with the nation-wide average of 350 g capita(-1) day(-1). About 29 metric tonnes (MT) solid waste is generated along a distance of about 19-km trek (a stretch of land or distance between two or more places covered by a walk) during a 4-month tourist season every year. Treks and trek stalls are the two major places where the visitors generate solid waste. Waste estimated from stalls accounted for about 51% by weight of the total waste generation in the trekking region. The native villagers generally construct stalls every year to meet the requirement of visitors going to Valley of Flowers (VOF) and Hemkund Sahib. The average annual results of 2 years (or equivalent to the average of one, 4-month tourist season for the region) showed non-biodegradable waste (NBW) to be 96.3% by weight whereas biodegradable waste (BW) amounted to merely 3.7%. From management point of view of the government, 96% NBW could easily be reused and recycled. Nevertheless, the need is to manage this waste by bringing it from the trekking areas to the road head (Govind Ghat) first and then to transport it to adjacent recycling centers. Cold drink glass bottles (68%), plastic (26%) and metal (2%) were the major items contributing to non-biodegradable waste. The remaining organic waste could be used as feedstock for composting. A well coordinated effort of public participation is necessary at all the levels for managing waste. There is a need to educate the visitors to instill in them the habit of considering discarded waste as potentially valuable and manageable.     

Screening of hepatoprotective effect of a herbal mixture against CCl4 induced hepatotoxicity in Swiss albino mice

The hepatoprotective potential of a herbal mixture was evaluated against CCl4 induced liver injury in Swiss albino mice. Liv 52, a commercially available polyherbal hepatoprotective drug was evaluated for comparison. The potential toxicity of the above herbal hepatoprotective agents was also compared. It was observed that there was a reduction in the enzyme biomarkers (Aspartate and Alanine Transaminase) of liver injury in the herbal mixture treated groups, which was similar to the reduction initiated by Liv 52. An increase in glutathione was observed in the herbal mixture treated groups and it was assumed that the herbal mixture protects the liver by virtue of its antioxidant nature along with high regeneration initiation potential. From the study it is also concluded that the herbal mixture is safer than Liv 52.     

Biodiesel production from a free fatty acid containing Karanja oil by a single-step heterogeneously catalyzed process

Karanja oil, containing 6.2% free fatty acids (FFAs), was considered for biodiesel production using a single-step solid-phase acid catalyzed process. Different types of zeolites and Amberlyst15 catalysts were tested and biodiesel was produced. Under similar conditions, the highest biodiesel yield was achieved using an Amberlyst15 catalyst, which contained 3–5% of moisture. The effects of operating parameters of the reaction such as reaction temperature, catalyst amount, and methanol-to-oil ratio were studied. An increase of methanol:oil ratio revealed a non-monotonic increase in biodiesel yields. Similar non-monotonic behavior was observed when Jatropha oil was used. Leaching and catalyst reusability were also considered. No significant effects of leaching were observed and catalyst reusability appeared to be affected by methanol interactions. The presence of a co-solvent, Tetrahydrofuran (THF), increased the biodiesel yield. Furthermore, an optimum amount of THF (THF:methanol volume ratio of 1:2) gave rise to the highest biodiesel yield. A biodiesel yield of 93% was achieved at 120 °C using a single-step process with Amberlyst15 as a catalyst, THF as a co-solvent, and a methanol:oil ratio of 30:1.     

Characterization of protease from Alcaligens faecalis and its antibacterial activity on fish pathogens

Alcaligens faecalis AU01 isolated from seafood industry effluent produced an alkaline protease. The optimum culture conditions for growth as well as enzyme production were 37 degrees C and pH 8. The partially purified protease had specific activity of 9.66 with 17.77% recovery with the molecular weight of 33 kDa and it was active between 30-70 degrees C and optimum being at 55 degrees C and pH 9. The enzyme retains more than 85% activity at 70 degrees C and 78% even at pH 10. The enzyme inhibited the growth of fish pathogens such as Flavobacterium sp., Pseudomonas fluorescens, Vibrio harveyi, Proteus sp. and Vibrio parahaemolyticus. From the present study it can be concluded that Alcaligens faecalis AU01 has the potential for aquaculture as probiotic agent and other several applications.     

Size distribution and source identification of total suspended particulate matter and associated heavy metals in the urban atmosphere of Delhi

A study of the atmospheric particulate size distribution of total suspended particulate matter (TSPM) and associated heavy metal concentrations has been carried out for the city of Delhi. Urban particles were collected using a five-stage impactor at six sites in three different seasons, viz. winter, summer and monsoon in the year 2001. Five samples from each site in each season were collected. Each sample (filter paper) was extracted with a mixture of nitric acid, hydrochloric acid and hydrofluoric acid. The acid solutions of the samples were analysed in five-particle fractions by atomic absorption spectrometry (AAS). The impactor stage fractionation of particles shows that a major portion of TSPM concentration is in the form of PM0.7 (i.e. <0.7microm). Similarly, the most of the metal mass viz. Mn, Cr, Cd, Pb, Ni, and Fe are also concentrated in the PM0.7 mode. The only exceptions are size distributions pertaining to Cu and Ca. Though, Cu is more in PM0.7 mode, its presence in size intervals 5.4-1.6microm and 1.6-0.7microm is also significant, whilst in case of Ca there is no definite pattern in its distribution with size of particles. The average PM10.9 (i.e. <10.9microm) concentrations are approximately 90.2%+/-4.5%, 81.4%+/-1.4% and 86.4%+/-9.6% of TSPM for winter, summer and monsoon seasons, respectively. Source apportionment reveals that there are two sources of TSPM and PM10.9, while three and four sources were observed for PM1.6 (i.e. <1.6microm) and PM0.7, respectively. Results of regression analyses show definite correlations between PM10.9 and other fine size fractions, suggesting PM10.9 may adequately act as a surrogate for both PM1.6 and PM0.7, while PM1.6 may adequately act as a surrogate for PM0.7.